Radio-Controlled Time On/Off Setting - La Crosse Technology WS-9043U Instruction Manual

Note: "DST OFF" indicates that the feature is off and the WWVB will not change times
automatically. "DST ON" indicates that the feature is on and the WWVB will change times
automatically.
Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time, and
should select "DST OFF".
6. Press and release the SET button to confirm and advance to the radio-controlled time on/off
setting.
V. RADIO-CONTROLLED TIME ON/OFF SETTING
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button three times.
4. "RCC" will appear in the DATE LCD and "ON" or "OFF" will flash in the TIME LCD.
5. Press and release the ALM/+ button to select radio-controlled time on or off.
6. Press and release the SET button to confirm and advance to the 12/24-hour time setting.
VI. 12 OR 24 HOUR TIME SETTING
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button four times.
4. "12h" or "24h" will flash in the DATE LCD.
5. Press and release the ALM/+ button to select 12 or 24-hour time format.
Note: When in the 12-hour format "P.M." will appear to the left of the hour in the time LCD
between the hours of noon and midnight.
6. Press and release the SET button to confirm and advance to the time setting.
VII. TIME SETTING
There are two methods by which the time and date can be set:
A) Automatically via WWVB reception, or
B) Manually.
A. WWVB (Remote Control Time)
7