Manual Time Setting; Setting The Year, Day And Month; Setting The Snooze - La Crosse Technology WS-9043U Instruction Manual

This method requires you to do nothing, except wait for the signal to be received, and to select a
time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best
conditions for reception is at night, between midnight and 6:00 am—when there is less atmospheric
interference. To keep your time as accurate as possible, the indoor weather station conducts a
WWVB search every night between these hours, and overrides any manually set time. The WWVB
tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress and a signal
is being received, and will remain steady when the signal has been received. If the WWVB time has
not been received after 15 minutes of battery installation, you may manually set the time or leave the
time function alone (reception will occur regardless).
B. MANUAL TIME SETTING
Note: When in the 12-hour format "P.M." will appear to the left of the hour in the time LCD
between the hours of noon and midnight.
Note: Reception of the WWVB signal will automatically set the time. The reception of the
signal will override any programmed time.
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button five times.
4. The hours digits will flash in the TIME LCD.
5. Press and release the ALM/+ button to advance the hours.
6. Press and release the SET button to confirm the hours setting and advance to the minutes
setting.
7. The minutes digits will flash in the TIME LCD.
8. Press and release the ALM/+ button to advance the minutes.
9. Press and release the SET button to confirm and advance to the year setting.
VIII. SETTING THE YEAR, DAY AND MONTH
Note: Reception of the WWVB signal will also set the date and day. The reception of the signal
will override any programmed date and day.
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting
will flash.
3. Press and release the SET button seven times.
4. The year will flash in the DATE LCD.
5. Press and release the ALM/+ button to advance the year.
6. Press and release the SET button to confirm the year and
advance to the month setting.
7. The month will flash in the DATE LCD.
8. Press and release the ALM/+ button to advance the month.
9. Press and release the SET button to confirm the month and
advance to the day setting.
10. The day of the month will flash in the DATE LCD.
11. Press and release the ALM/+ button to advance the day of the
month.
12. Press and release the SET button to confirm and advance to the
snooze setting.
IX. SETTING THE SNOOZE
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
8