TALAMEX X Series Manual page 34

INSTALLING THE PROPELLER
1. Rotate the motor shaft to insert the propeller pin horizontally.
2. Install the propeller onto the motor shaft by engaging the propeller onto the propeller pin.
3. Install the washer onto the propeller shaft, then install the propeller nut. Use the mini wrench to tighten the propeller nut
until it is snug.
IMPORTANT: Do not overtighten the propeller nut, or damage to the propeller or propeller pin may occur.
d d
b
a - propeller
b - washer
c – propeller pin
d – propeller nut
Information about Talamex-accessoiries
Go to www.Talamex.com for an overview of original accessories of all Talamex trolling engines.
34
a
a – propeller pin
a
a
b
c
c