TALAMEX X Series Manual page 33

Battery Inspection
The battery should be inspected at periodic intervals to ensure proper trolling motor operation.
IMPORTANT: Read the safety and maintenance instructions which accompany your battery.
1. Ensure that the battery is secured to the vessel.
2. Ensure that the battery cable terminals are clean, tight, and correctly installed. For installation instructions, refer to Bat-
tery Connection.
3. Ensure that the battery is equipped with a battery box to prevent accidental shorting of the battery terminals.
Propeller Replacement
Performing service or maintenance without first disconnecting the battery can cause product damage, personal injury, or death
due to fire, explosion, electrical shock, or unexpected motor starting. Always disconnect the battery cables from the battery
before maintaining, servicing, installing, or removing motor components.
REMOVING THE PROPELLER
1. Disconnect the power cables from the battery.
2. While holding the propeller blade with one gloved hand, use the supplied mini wrench to remove the propeller nut.
IMPORTANT: Remove the propeller nut with the supplied mini wrench. Using another tool may damage the propeller nut or
shaft. If the propeller cannot be removed easily with the mini wrench, use a plier to carefully unscrew the nut.
NOTE: replace the propeller pin if it is bent.
! WARNING
33