Multipathing Software; Table 5 6540 Multipathing Software - Sun Microsystems StorageTek 6140 Array Release Notes

Multipathing Software

You must install multipathing software on each data host that communicates with
the Sun Storage 6140 Array.
For Solaris OS 8 and 9 data hosts, the multipathing software is part of the Sun
StorageTek SAN Foundation Kit (SFK) software. Solaris OS 10 includes the
multipathing software. For data hosts running the Solaris OS, follow the instructions
in the Sun StorageTek 6140 Array Hardware Installation Guide to download and install
the software from the Sun Download Center.
TABLE 5
6540 Multipathing Software
TABLE 5
Multipathing
OS Software
Solaris 8/9 S STMS/MPxIO
Solaris 10 STMS/MPxIO
Solaris 8, 9 RDAC
Solaris 8,9,10 Symantec Veritas
with DMP Dynamic Multi-
Pathing (DMP)
Windows RDAC/MPIO
2000/2003 Non-
Clustered
Windows MSCS RDAC/MPIO
Cluster
Windows DMP
2000/2003
Non-Clustered
with DMP
lists supported multipathing software by operating system.
Minimum Version
SFK 4.4.10
Update 6
Update 5 with
patch 137137-09
(Sparc),
137138-09 (x64)
09.10.02.01
5.0
09.01.32.30
(RDAC)
09.01.32.30
(RDAC)
5.0
Latest Version Host Type Setting
SFK 4.4.13 Solaris with
MPxIO
4.4.14 (Solaris 9)
Kernel Jumbo Solaris with
Patch (KJP) MPxIO
9.10.02.01 Solaris with
MPxIO
5.0MP3 Solaris with
DMP
01.03.0302.0013 Windows
2000/2003
(MPIO)
Non Clustered
01.03.0302.0013 Windows
2000/20003
(MPIO)
Clustered
5.1 Windows
2000/Server 2003
non-clustered
(with Veritas
DMP)
Sun StorageTek 6140 Array Release Notes, Release 6.2
Notes
Support for
RDAC on
Windows stops
at 6.60 firmware.
You must use
MPIO for 7.10
and above
7