Daylight Saving Time (Dst) Setting - La Crosse Technology WS-7391UD Instruction Manual

3. Press and release the "+" button to select your
desired time zone.
The TIME LCD displays the 3 letter abbreviations for the
time zones found in North America. Observe the chart
below, showing corresponding abbreviations, time zones,
and codes.
Display Time
Zone
GMT GMT
AST Atlantic
EST; Eastern
CST; Central
MST; Mountain
PST; Pacific
ALA; Alaska
HAW; Hawaii
4. Press and release the "SET" button to confirm and
advance to the Daylight Saving Time setting (skip
step 1and 2 in section IV if continuing).
IV. Daylight Saving Time (DST) Setting
1. Press and hold the "SET" button for 2 seconds or
until "12h" or "24h" flashes.
2. Press and release the "SET" button 4 times to reach
the DST selection mode.
3. DST 1 is the default setting.
4. Press and release the "+" button to select DST 1
(recognizes Daylight Saving Time change) or DST 0
(does not change with Daylight Saving Time).
Hours from
GMT
0
-4
-5
-6
-7
-8
-9
-10
11