Dst (Daylight Saving Time) Setting; Time Reception On/Off Setting; 12/24-Hour Setting; Manual Time Setting - La Crosse Technology WS-9520U Instruction Manual

Weather projection station
Table of Contents

Advertisement

The time zone default of the weather projection station is EST –5. To set a different time zone:
1.
The current time zone value starts flashing.
2.
Use the CH/+ key to set the time zone. The range runs from 0 to -12 and then runs from +12 back to
0 in consecutive 1-hour intervals. The U.S. time zones are –5hr(EST), -6hr(CST), -7hr(MST) and –
8hr(PST) zones.
3.
Confirm with the SET key and enter the DST (Daylight Saving Time) setting.

DST (DAYLIGHT SAVING TIME) SETTING:

Note: The DST default is "ON", meaning that the received time will automatically be adjusted according to
Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts
of Indiana) turn the DST "OFF".
1.
The digit "ON" will start flashing on the LCD.
2.
Use the CH/+ key to turn OFF the DST function.
3.
Confirm with the SET key and enter the Time Reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

In area where reception of the WWVB time is not possible, the WWVB time reception function can be turn
OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
The digit "ON" will start flashing on the LCD.
2.
Use the CH/+ key to turn OFF the time reception function.
3.
Confirm with the SET key and enter the 12/24-HOUR setting.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any reception of
the WWVB time as long as the Time Reception OFF function is activated.
The Time Reception and the "WWVB" icons will not be displayed on the LCD.

12/24-HOUR SETTING:

Flashing
The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 12-Hour)
1.
Use the CH/+ key to toggle between "12H" or "24H".
2.
Confirm with the SET key and enter the Manual time setting.

MANUAL TIME SETTING:

In case the weather projection station cannot detect the WWVB-signal (for example due to disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
Hour flashing
Flashing
Digits
flashing
9
Minutes flashing

Advertisement

Table of Contents
loading

Table of Contents