Advertisement
Quick Links
Congratulations on purchasing this state-of-the-art Weather Station as an example of fine design and quality piece of engineering. The operation of this product is simple and
straightforward. By reading this instruction manual, users will receive a better understanding of the Weather Station together with the optimum benefit of all its features.
The Weather Station
LCD
Display
The Temperature Transmitter
Features of the Weather Station
•
4 digits LCD time display
•
Current indoor temperature display in degree Fahrenheit
•
Simultaneous minimum and maximum indoor temperature recordings
•
Current relative humidity display with "☺" Smilling or " " Sad face for comfort level reading.
•
3 weather icons for weather forecasting
•
Weather tendency indicator
•
Relative air pressure inHg with adjustable reading ranges
•
Air pressure history for the past 72 hours (electronic barometer with barometric pressure and trend)
•
Current outdoor temperature display in degree Fahrenheit
•
Simultaneous minimum and maximum outdoor temperature recordings.
•
LCD contrast changeable to 8 different tones
•
Low battery indicator
•
Wall mounting
Features of the Temperature Transmitter:
•
Remotely transmits outdoor temperature at 433MHz to the Weather Station
•
With wall mounting holder
Getting Started
Please follow these steps to ensure that your Weather Station and Temperature Transmitter work correctly together:
Remove all pieces from the packaging and place onto a table in front of you.
Check that you have complete:
1.
Weather Station
2.
433MHz temperature transmitter
3.
Sealed pack with 3 screws and double-sided tape for wall mounting the transmitter
Setting up
(picture of the weather station; cover separate from the unit)
Battery
cover
Battery compartment
Wireless Weather Station
Instruction Manual
Hanging Hole
Holder
Battery
compartment
Battery
cover
+ Key
Advertisement
Related Manuals for La Crosse Technology WS-7090U
Summary of Contents for La Crosse Technology WS-7090U
- Page 1 Congratulations on purchasing this state-of-the-art Weather Station as an example of fine design and quality piece of engineering. The operation of this product is simple and straightforward. By reading this instruction manual, users will receive a better understanding of the Weather Station together with the optimum benefit of all its features. The Weather Station Display The Temperature Transmitter...
- Page 2 Set key Slide open the battery cover of the transmiter as indicated above. Checking the correct polarization, insert the 2 x AAA, IEC LR3, 1.5V batteries into the battery compartment. Replace the cover while ensure the batteries do not spring free from the contacts as this may cause transmission start up problems. Within 2 minutes of step 3, flip open the front cover of the Weather Station from slot at the base of the unit.
- Page 3 Note: The hPa setting feature can be used in area where there may be constant changes in air pressure which do not necessarily reflect the changes in the weather. In such areas for example, the hPa might be set to every 3hPa (millibars meaning that there will be no change of weather icons if the air pressure does not drop or increase by at least 3hPa.
- Page 4 Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather Station to collect air pressure data at a constant altitude and therefore result in an more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed.
- Page 5 Note: When the 433MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Temperature station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Resetting below) otherwise transmission problems may occur. The transmission range is around 25 m from the transmitter to the Temperature station (in open space).
-
Page 6: Warranty Information
Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. - Page 7 OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610...