Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for La Crosse Technology WS-7042TWC
Summary of Contents for La Crosse Technology WS-7042TWC
- Page 1 WS-7042TWC Wireless 433 MHz Weather Station with Forecast Instruction Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys Time Setting Features Weather Forecast Indoor Temperature and Humidity Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Additional Remote Temperature Sensor 10-11 Units (Set-Up, Viewing &... -
Page 3: Inventory Of Contents/Additional Equipment
INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX6U remote temperature sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. Figure 2 Time LCD Indoor LCD Mounting... -
Page 4: Detailed Set-Up Guide
(All remote temperature sensors must be started before the indoor weather station) 4. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES. In this time the indoor weather station and remote temperature sensor will start to talk to each other and the indoor weather station will show both the indoor temperature and an outdoor temperature. -
Page 5: Program Mode
OUT button is pressed during programming modes, the unit will set the last information entered—the display will stop flashing and return to normal time-date readings A. Function Keys There are four function buttons on the WS-7042TWC. The two buttons on the front are labeled “MIN/MAX/RESET”... -
Page 6: Time Setting
1 with each press of the “+” button. 7. Press and release the “SET” button to confirm the minutes and complete the time setting. FEATURES OF THE WS-7042TWC Time Display Indoor Humidity Indoor Temperature... -
Page 7: Weather Forecast
The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of air pressure over time. The WS-7042TWC averages past air-pressure readings to provide an accurate forecast—creating a necessity to disregard all weather forecasting for 12-24 hours after the unit has been set-up, reset, or moved from one altitude to another (i.e. -
Page 8: Indoor Temperature And Humidity
OUTDOOR LCD. (This feature is explained in further detail in section V—Adding Remote Temperature Sensors). IV. Minimum and Maximum Temperature Records The WS-7042TWC keeps a record of the MINIMUM and MAXIMUM temperature for both the indoor and outdoor modes. A. Viewing Minimum and Maximum Temperature Records 1. -
Page 9: Units (Set-Up, Viewing & Operation)
WS-7042TWC. These extra remote temperature sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. A TX6U will monitor temperature only, a TX3U will monitor... -
Page 10: Mounting
5. Install batteries into the indoor weather station. 6. Follow the Detailed Set-Up Guide for programming and operating instructions. B. Viewing and Operating Multiple Remote Sensors To view the temperature of a different remote sensor unit, press and release the “CH” button. An arrow over one of the numbers at the bottom of the LCD will be seen. - Page 11 a North-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours.
-
Page 12: Troubleshooting
3) Remove the protective strip from the other side of the tape. Position the remote temperature sensor in the desired location, ensuring that the indoor temperature station can receive the signal. II. THE INDOOR TEMPERATURE STATION The indoor temperature station can be mounted in two ways: •... -
Page 13: Maintenance & Care
Under non-laboratory conditions, it is difficult to compensate for the above factors and obtain an accurate comparison. NOTE: For problems not solved, please contact La Crosse Technology. MAINTENANCE AND CARE INSTRUCTIONS •... -
Page 14: Specifications
SPECIFICATIONS Temperature measuring range: Indoor 32°F to 139.8°F with 0.2°F resolution (0°C to 59.9°C with 0.1°C resolution) “OFL” displayed if outside this range Outdoor -21.8°F to 157.2°F with 0.2°F resolution (-29.9°C to 69.9°C resolution) “OFL” displayed if outside this range Indoor relative humidity 19% to 95% with 1% resolution measuring range... -
Page 15: Warranty Information
WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this indoor weather station. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the indoor weather station in for repairs, contact La Crosse Technology. - Page 16 FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Need help?
Do you have a question about the WS-7042TWC and is the answer not in the manual?
Questions and answers