Table of Contents
Advertisement
Quick Links
Product description
• Constant current built-in LED Driver
• Motion and daylight detection (included in delivery)
• For luminaires of protection class I and protection class II
• Temperature protection as per EN 61347-2-13 C5e
• Selectable fixed output current 350, 300, 250 and 200 mA
• Max. output power 35 W
• Up to 87 % efficiency
• Nominal life-time up to 100,000 h
• 5-year guarantee (conditions at www.tridonic.com)
Housing properties
• Casing Driver: metal, white
• Casing sensor: polycarbonat, white
• Type of protection IP20
Functions
• Overload protection
• Short-circuit protection
• No-load protection
È
Technical data LED Driver, page 3
Product description LED Driver, page 4–6
Technical data Motion Sensor, page 3
Product description Motion Sensor, page 7–9
Data sheet 11/21-LC888-6
Subject to change without notice. Information provided without guarantee.
LED Driver
Linear fixed output
Driver LC 35W 200-350mA stepDIM lp SNC
essence series non-SELV (stepDIM)
LED Driver with sensor (included in delivery)
www.tridonic.com
1
Advertisement
Table of Contents
Related Manuals for Tridonic Essence LC 35W 200-350mA stepDIM lp SNC
Summary of Contents for Tridonic Essence LC 35W 200-350mA stepDIM lp SNC
- Page 1 • Selectable fixed output current 350, 300, 250 and 200 mA • Max. output power 35 W • Up to 87 % efficiency • Nominal life-time up to 100,000 h • 5-year guarantee (conditions at www.tridonic.com) Housing properties • Casing Driver: metal, white • Casing sensor: polycarbonat, white •...
-
Page 2: Ordering Data
Mains surge capability (between L/N – PE) 2 kV Surge voltage at output side (against PE) 4 kV Life-time up to 100,000 h Guarantee (conditions at www.tridonic.com) 5 years Dimensions L x W x H 230 x 30 x 21 mm Hole spacing D 218 mm... - Page 3 89 x 15.8 x 12. 1 mm Hole spacing D 84 mm 1 2 3 4 5 6 ≥ 3.5 m radius at 1 m/s speed at mounting height 3 m. Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee.
-
Page 4: Product Description
Hot plug-in or output switching of LEDs is not permitted and may cause ��� – ��� mm a very high current to the LEDs. 3.7 Mounting of device Max. torque for fixing: 0.5 Nm/M4 Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee. -
Page 5: Electrical Values
THD without harmonic < 5 mA (0.6 %) of the input current: Load [ ] 4.2 Power factor vs load Load [ ] 200 mA 250 mA 300 mA 350 mA Load [ ] Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee. - Page 6 If the product is used outside a luminaire, the installation must provide suitable protection for people and environment (e.g. in illuminated ceilings). 6.3 Additional information Additional technical information at www.tridonic.com → Technical Data Life-time declarations are informative and represent no warranty claim. No warranty if device was opened.
-
Page 7: Installation
Cable: White UL 20276 3x24AWG black-red-yellow Heat tube: φ 4.5 UL L = 28 mm Connector: XH2.5-T 4P white shell with buckle Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee. -
Page 8: Ceiling Installation
1. When the thickness of the baffle plate and the aluminum substrate (all the metal part) is D < 1 mm, the suggested hollow length is 80 mm, width > 13 mm. lamp board: aluminum substrate: Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee. - Page 9 DIP switch factory settings all default ON state. Set the DIP switch only after mains off. Hot plug-in is not permitted when connecting sensors. Daylight sensor ● 30 lux (default) ○ disable Data sheet 11/21-LC888-6 www.tridonic.com Subject to change without notice. Information provided without guarantee.
-
Page 10: Motion Detection
In the test room, the module is installed with the antenna facing down and 5.2 Additional information the person is moving in the direction of the sensor at a speed of 1 m/s. Additional technical information at www.tridonic.com → Technical Data Location Location Location Lifetime declarations are informative and represent no warranty claim.
Need help?
Do you have a question about the Essence LC 35W 200-350mA stepDIM lp SNC and is the answer not in the manual?
Questions and answers