CVPM02, CVPM05, CVFM04 User Guide
The MegaRAID controller and the remote mount board are then installed in PCIe slots on the motherboard. The CVPM05
module can be mounted locally in the system as long as sufficient airflow maintains proper operating temperature range.
See
CacheVault Module Specifications
The CVPM05 module works with the following MegaRAID controllers:
•
MegaRAID 9365-28i
•
MegaRAID 9460-16i
•
MegaRAID 9460-8i
•
MegaRAID 9480-8i8e
•
MegaRAID 9560-16i
•
MegaRAID 9560-8i
•
MegaRAID 9580-8i8e
Perform the following tasks to attach the CVPM05 module by cable to your MegaRAID controller, and then install the
MegaRAID controller and the remote mount board on the motherboard.
1. Remove the MegaRAID controller from the host system. See
Computer.
2. Install the clip on the remote mount board. See
3. Attach the CVPM05 module to the clip. See
4. Connect the MegaRAID controller by cable to the remote CVPM05 module. See
Module to the MegaRAID
5. Install the MegaRAID controller and the remote mount board in the host computer. See
Controller and Remote Mount Board in the
Broadcom
for airflow requirements.
Installing the Clip on the Remote Mount
Attaching the CVPM to the Clip on the Remote Mount
Controller.
Motherboard.
CVPM02, CVPM05 Power Modules | CVFM04 Cache Module
Removing the MegaRAID Controller from the Host
Connect the Remote CVPM05
Board.
Board.
Install the MegaRAID
CVPM02-05-CVFM04-UG101
15
Need help?
Do you have a question about the CVPM02 and is the answer not in the manual?