Lifecanvas Technologies SmartBatch+ User Manual page 9

8. Ensure that there is water in the device and do not run the pump dry. Press "Auxiliary
Power" on the touchscreen. This will turn on the liquid pump, sample cup mixing, and
sample cup rotation. Upon startup the Chamber Hex Piece will rotate faster than normal
for 5 seconds to allow you to visually verify that the Hex Piece is indeed rotating. The
software will also deactivate so that power cannot be cycled too quickly for some
components.
9. If you wish to use the optional Extended Drain Tube, simply press the hard plastic end
into the bottom of the Drain Valve.
10. The device is now fully installed and you are ready to proceed!
11. If you will not be using the device immediately, turn off the Auxiliary Power, main power
switch and drain out the liquid in the chamber using the Drainage Valve.
www.lifecanvastech.com info@lifecanvastech.com
8