Installation - Lifecanvas Technologies SmartBatch+ User Manual

Installation

Please take note of the following before installation:
● Do not use the instrument for purposes other than those indicated by the manufacturer.
● At least two people are required to move the instrument.
● The instrument must be placed in a stable and level location on a non-metal surface.
● The instrument must be placed such that the power cord and switch are easily
accessible at any time.
● Follow instructions contained in the manual when setting up and operating the
instrument, and when changing consumables.
● If deemed necessary, ask the manufacturer or your sales agent for help when setting up
the system.
● Connect the instrument to an electrical outlet according to local or country standard.
● Do not switch on the instrument without having waited at least 10 seconds after
switching it off.
● Only use buffers, sample cups, and parameter ranges provided by LifeCanvas
Technologies. See product warranty for further information.
● Use the volumes recommended by LifeCanvas Technologies.
● Do not leave the instrument in humid or wet conditions, as doing so could cause an
electrical short.
● Do not use the instrument outdoors.
● Leave at least 1 foot (30 cm) of space on the left and right sides of the device to allow for
proper airflow.
● Power requirements: 100-240 VAC, 50-60Hz, 5A
Note: In the event of unexpected problems, please contact your service representative or
LifeCanvas Technologies immediately:
info@lifecanvastech.com
www.lifecanvastech.com info@lifecanvastech.com
5