Yamaha XSR900 Owner's Manual page 40

Instrument and control functions
TIP
1

The traction control system can
only be turned on or off via the
2
main screen using the MODE
switches.
3

SCS and LIF can be turned off in-
dependently of traction control
4
system for "TCS-MODE M".

When "TCS-MODE" has been set
5
to "OFF" on the main screen: trac-
tion control system, SCS and LIF
6
are all turned off together.
7
SCS
SCS can be set to OFF, 1, 2, and 3.
8
OFF turns the slide control system off,
setting level 1 provides the least
9
amount of system intervention, and set-
ting level 3 provides the greatest
10
amount of system intervention.
11 LIF
LIF can be set to OFF, 1, 2, and 3.
Setting level 1 provides the least
12
amount of system intervention and set-
ting 3 most strongly reduces the rate of
13
wheel lift.
OFF turns LIF off.
"Vehicle Setting"
Vehicle Setting
BC Setting
QS Setting
The vehicle setting module allows you
to adjust setting for the BC and quick
shifter.
BC
BC Setting
BC 2
The brake control system has two set-
tings, BC1 and BC2. Select BC1 when
only standard ABS is desired. Select
5-16
BC2 to have the brake control system
further regulate brake pressure while
cornering to suppress lateral wheel slip.
TIP
For skilled riders and when riding at the
track, due to varying conditions, the
BC2 brake system may engage sooner
than expected relative to your desired
cornering speed or intended cornering
km/h
line.
Quick shifter
QS
QS
The quick shifter indicators are divided
km/h
into QS
and QS are not linked and can be in-
dependently turned on or off.
The quick shifter can be set to ON or
OFF.
QS Setting
ON
ON
km/h
and QS sections. QS