Yamaha XSR900 Owner's Manual page 35

Coolant temperature:
The coolant temperature is displayed
from 40 C (104 F) to 124 C (255 F)
in 1 C (1 F) increments.
TIP

If the vehicle coolant temperature
is below 40 C (104 F) the coolant
temperature display will read "Lo"

If the vehicle coolant temperature
is above 124 C (255 F) the cool-
ant temperature display will read
"Hi"
Fuel Meter:
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear from
"F" (full) towards "E" (empty) as the fuel
level decreases. When the last seg-
ment starts flashing, refuel as soon as
possible.
Instrument and control functions
Fuel consumption trip meter:
Displays how much fuel has been con-
sumed since the trip meter was last re-
set.
Trip time:
Displays engine running time.
To reset information display items
1. Rotate the wheel switch to select
one of the two vehicle information
displays.
2. Press the wheel switch inward to
highlight the information display.
3. Rotate the wheel switch to select
the desired information display
item.
4. Press and hold the wheel switch
inward until the highlighted display
item is reset.
5-11
Transmission gear display
This shows which gear the transmis-
sion is in. This model has 6 gears and a
neutral position. The neutral position is
indicated by the neutral indicator light
" " and by the transmission gear dis-
play " ".
MODE display
This display shows the currently select-
ed "D-MODE" and "TCS-MODE" set-
tings. The mode that is enlarged and
displayed on the right can be adjusted
using the MODE up/down switches.
Use the "MODE" switch to toggle
left-right between "TCS-MODE" and
"D-MODE".
See page 4-3 for information on
"D-MODE" and "TCS-MODE" settings.
1
2
3
4
5
6
7
8
9
10
11
12
13