Yamaha XSR900 Owner's Manual page 31

30 seconds have passed, the indicator
light will flash steadily to indicate the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
Transponder interference
If the immobilizer system indicator light
flashes in the pattern, slowly 5 times
then quickly 2 times, this could be
caused by transponder interference. If
this occurs, try the following.
1. Make sure there are no other im-
mobilizer keys close to the main
switch.
2. Use the code re-registering key to
start the engine.
3. If the engine starts, turn it off, and
try starting the engine with the
standard keys.
4. If one or both of the standard keys
Instrument and control functions
do not start the engine, take the
vehicle and all 3 keys to a Yamaha
dealer to have the standard keys
re-registered.
Stability control indicator light "
This indicator light flashes when the
traction control system, SCS, or LIF
systems engage while riding. When
"TCS-MODE" is set to "OFF", the indi-
cator will come on.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
NOTICE
When turning the main switch on,
avoid any movement or vibration of
the vehicle as it may interfere with
the initialization of the IMU. If this oc-
curs, the traction control system will
not operate and the "TCS-MODE"
display will read "OFF" until the IMU
5-7
can initialize.
Oil pressure and Coolant tempera-
ture warning light "
EAU91472
This warning light comes on if the en-
"
gine oil pressure is low or if the coolant
temperature is high. If this occurs, stop
the engine immediately.
TIP

When the vehicle is first turned on,
this light should come on until the
engine is started.

If a malfunction is detected, this
light will come on and the oil pres-
sure icon will flash.
NOTICE
ECA27222
If the oil pressure and coolant warn-
ing light does not go off after start-
ing the engine or if it comes on while
the engine is running, stop the vehi-
cle and engine immediately.

If the engine is overheating, the
coolant temperature warning
icon will come on. Let the en-
gine cool. Check the coolant
1
EAU88362
2
"
3
4
5
6
7
8
ECA22441
9
10
11
12
13