Maintenance - Polaris PROSPECTOR PRO 2.0 User Manual

MAINTENANCE

MAINTENANCE
WARNING
Do not insert hands or feet into or near the
System unless the engine is off, and the vehicle is
stopped with the security brake engaged.
CAUTION: Regular inspection, adjustment and
lubrication of the Track System is essential to its
good running order and safe operation. Users are
responsible to perform maintenance and regularly
adjust their Track System. The "Maintenance"
section provides the necessary information to
perform adequate maintenance on the Track
System.
CAUTION: Failure to do regular maintenance at
the prescribed intervals
preventive adjustments
maintenance schedule can result in premature
wear and important breakage on the Track System
that will not be covered under the warranty. Users
are responsible to
schedule provided by the manufacturer.
MAINTENANCE
SYSTEM - VISUAL INSPECTION
SYSTEM - ADJUSTMENTS
SYSTEM - VEHICLE ALIGNMENT
SYSTEM - BOLT TORQUE
TRACK- TENSION
TRACK - WEAR
WHEELS - SIDE WEAR
WHEELS - BEARINGS
¤
WHEELS - SEAL LUBRICATION
¤
FRAME - HUB BEARINGS
¤
FRAME - HUB BEARING SEAL
FRAME - TRACK GUIDE WEAR
FRAME - STABILIZERS
FRAME - CRACKS
SPROCKETS - WEAR
ANTIROTATION - LUBRICATION
ANTIROTATION - BOLT TORQUE
ANTIROTATION - CRACKS, DEFORMATION
VEHICLE - SUSPENSION ARM BOLT TORQUE
VEHICLE - STEERING MECHANISM
A: Commercial use / Industrial use / Abrasives conditions
¤
Important maintenance
17
and perform
indicated in
follow the maintenance
INITIAL
FIRST USE
CLEAN / INSPECT
ADJUST
ADJUST
ADJUST
INSPECT / ADJUST
CAUTION: Do not use a brake cleaning solvent to
clean the Track System. This may damage sealing
components and stickers.
The maintenance schedule has been established
in order to provide optimum durability for your
Track System. The type of usage and the
conditions in which the Track System is used,
have a direct bearing on the frequency of
maintenance actions to perform. After inspection
of your Track System, you will be able to
determine if the recommended maintenance
intervals are correct or to adjust them as needed.
For optimum
durability, please refer to the maintenance chart
below.
the
For more details on the maintenance program,
the
consult the
page 18 and page 19.
A B
EVERY 25 - 40 HRS
CLEAN / INSPECT
INSPECT / ADJUST
INSPECT / ADJUST
INSPECT / ADJUST
INSPECT / ADJUST
B: Normal winter conditions
performance and
Maintenance specifications
INTERVALS
A B
EVERY 50 - 75 HRS EVERY 200 HRS
INSPECT / ADJUST
INSPECT / REPLACE
INSPECT INSPECT / REPLACE
¤
INSPECT / LUBRICATE REPLACE / LUBRICATE
INSPECT / REPLACE
¤
LUBRICATE INSPECT / LUBRICATE
INSPECT / REPLACE
INSPECT / REPLACE
CLEAN / LUBRICATE CLEAN / LUBRICATE
INSPECT / ADJUST
maximum
on
A B
/ ANNUAL
CLEAN / INSPECT
INSPECT / ADJUST
INSPECT / ADJUST
INSPECT / ADJUST
INSPECT / ADJUST
INSPECT
¤
¤
¤
CLEAN / INSPECT
CLEAN / INSPECT
INSPECT
INSPECT / ADJUST
INSPECT / ADJUST