Appendix; Troubleshooting Guide - LXE 9000A3775 User Manual

22

Troubleshooting Guide

The following is intended as an aid in determining whether the battery pack or the charger may be
malfunctioning.
Problem
Battery pack does not fit in
charger or charger/analyzer
pocket.
No battery pack in charger,
but the temperature LED is
on.
Charger is plugged into a live
outlet, battery pack is
inserted, but RED LED is
OFF and no other LEDs are
on.
RED LED at any station is
flashing.
MX3 Multi-Charger Plus User's Guide
Chapter 3 Appendix
Cause
Different manufacturer's
battery pack, or there is an
object in the charger pocket.
Dirt or foreign objects are in
the charger pocket.
Battery pack is not making
contact with terminals in the
charger pocket.
The battery pack is not
making good contact with
terminals in charger pocket.
OR
Current could not be sourced
through the battery pack due
to age, exhaustion or damage
to the cell(s).
OR
The battery pack voltage has
not reached 10.6VDC within
90 minutes and the charger
has timed out.
OR
The charger's 4-hour or 6-
hour timeout period has
expired.
Troubleshooting Guide
Solution
Check if the battery pack is LXE part number
156213-0001, 158224-0001 or 159922-0001.
If not, do not use. Remove the object from the
charger pocket.
Unplug charger from outlet. Remove any dirt
or foreign objects from charger pocket. If the
LEDs continue to remain ON, the charger may
be defective. Return charger to an authorized
LXE service center.
Push battery pack in firmly. Do not "slam" the
battery pack into the battery pocket.
Push battery pack in firmly. Do not "slam" the
battery pack into the charger pocket.
Contact LXE for battery pack replacement
options.
Contact LXE for battery pack replacement
options.
Make sure that the battery pack temperature is
within specification and retry charging. If
problem repeats, contact LXE for battery pack
replacement options.
E-EQ-MX3MCPLUS-E