Using The Charge/Analyze Pocket; Placing The Battery Pack Into The Multi-Charger Plus; Orienting The Battery Pack; Inserting The Battery Pack - LXE 9000A3775 User Manual

the Charge/Analyze Pocket
Using

Using the Charge/Analyze Pocket

The charge/analyze pocket can be used to:

Placing the Battery Pack into the Multi-Charger Plus

Orienting the Battery Pack

Caution!
!
When preparing the battery pack for insertion into the charger/analyzer pocket, hold it with the
Back (the side with only three metal contacts and grooved surface) upward, and the Top (the side
with the metal retaining clip) to the left. The Front (the side with the six contacts and the smooth
surface) will face downwards, into the charging/analyzing pocket.

Inserting the Battery Pack

Lower the battery pack straight into the battery charger/analyzer pocket and push it down firmly
until the retaining clip catches on the retaining pins.
Caution!
!
E-EQ-MX3MCPLUS-E
•
Charge a battery pack in less than four hours.
•
Analyze a battery pack, ending with the battery pack fully charged, in less than ten
hours.
It is important that battery packs are inserted into the charging/analyzing pocket
correctly. Inserting the battery incorrectly could result in damage to the battery
pack or the charger/analyzer.

Figure 6 Battery Charger/Analyzer Pocket Insertion

Do not "slam" or slide the battery pack into the charger/analyzer. Damage may
result.
MX3 Multi-Charger Plus User's Guide
13