The Charge/Analyze Pocket; Figure 4 Analyze Pocket Components - LXE 9000A3775 User Manual

Setup

The Charge/Analyze Pocket

When a battery pack is inserted into the charger/analyzer pocket, press the analyze dome switch
within 15 seconds to start the battery pack analysis. The analysis process ends with the battery
fully charged. If the dome switch is not pressed, the battery pack is charged, but not analyzed.
The LCD screen indicates the status of the charger/analyzer pocket. During battery analysis, the
LCD screen displays the word "ANALYZE" plus an indication of the progress of the analysis
(CHARGE, DISCHARGE or READY). If the battery is only being charged, the LCD screen only
displays "CHARGE" or "READY". Please refer to "Interpreting the LCD Screen" later in this
guide for more details.
E-EQ-MX3MCPLUS-E

Figure 4 Analyze Pocket Components

1. Battery Charging/Analyzing Pocket
2. Battery Multi-Charger Plus Contacts
3. Retaining Pins
4. LCD Screen
5. Dome Switch
6. LED Indicator
MX3 Multi-Charger Plus User's Guide
11