Monitors
Progress
Analyze – Final Charge
The final step in the analysis process is to recharge the battery pack after it is fully discharged.
The final charge requires about 2.5 hours.
The LCD indicates:
For information on battery capacity, please refer to "Battery Capacity" later in this guide
E-EQ-MX3MCPLUS-E
CHARGE
2
ANALYZE
Figure 11 LCD Screen, Analyze, Final Charge
•
The battery is charging (CHARGE).
•
This is the second and final charge (2).
•
The battery is under analysis (ANALYZE).
•
The battery capacity measured during the analysis (1310mAh). This is an example
and can vary depending on the battery pack's maximum capacity.
1310
mAh
11.2
V
MX3 Multi-Charger Plus User's Guide
19