Operating With The Seat Raise/Lower Switch - Toyota Sienna Owner's Manual

34
1-2. Operating the AUTO ACCESS SEAT

Operating with the seat raise/lower switch

If the battery of the wireless remote control has discharged or
another malfunction has occurred, the seat raise/lower switch
can be used to operate the AUTO ACCESS SEAT. (The AUTO
ACCESS SEAT will operate in the same way as when operated
using the wireless remote control).
Park the vehicle on a flat surface and leave the engine running.
1
Shift the shift lever to P and set the parking brake.
2
Open the right-hand sliding door fully.
3
Fold the front passenger seatback. (P. 21)
4
Press and hold the seat raise/
5
lower switch.
Raise
1
Lower
2
The beep will sound once, and
the AUTO ACCESS SEAT will
operate.
The AUTO ACCESS SEAT will
operate while the switch is being
pressed.
released, the seat will stop in
that position.
When the AUTO ACCESS SEAT stops automatically, release the
6
switch.
When returning the AUTO ACCESS SEAT to the vehicle, release the
switch after the seat has stopped automatically and the beep has sounded
once.
SIENNA_AAS_OM08011U_(U)
If the switch is