Operating With The Seat Raise/Lower Switch - Toyota Sienna 2013 Manual

1-2. Operating the AUTO ACCESS SEAT

Operating with the seat raise/lower switch

If the battery of the wireless remote control has discharged or
another malfunction has occurred, the seat raise/lower switch can
be used to operate the AUTO ACCESS SEAT. (The AUTO ACCESS
SEAT will operate in the same way as when operated using the wire-
less remote control).
STEP 1
Park the vehicle on a flat surface and leave the engine run-
ning.
STEP 2
Shift the shift lever to P and set the parking brake.
STEP 3
Open the right-hand sliding door fully.
STEP 4
Fold the front passenger seatback while pulling the seat-
back angle lever. (P. 20)
STEP 5
SIENNA AAS_OM45476U_(U)
Press and hold the seat raise/
lower switch.
Raise
Lower
The beep will sound once, and
the AUTO ACCESS SEAT will
operate.
The AUTO ACCESS SEAT will
operate while the switch is
being pressed. If the switch is
released, the seat will stop in
that position.
1
35