Toyota Sienna Owner's Manual page 49

If the AUTO ACCESS SEAT moves when a switch is pressed
● Initialize the seat position information before conducting the opera-
tions listed here.
● The movements of the seat while conducting these operations will
be different from normal.
● If the seat resets while the operations from step
being carried out, a long beep will sound, and the seat's move-
ments will return to normal.
Adjust the head restraint to the downmost position. (P. 10)
1
Fold the footrest up. (P. 13)
2
Fold the front passenger seatback. (P. 21)
3
Press and hold the raise side of
4
the seat raise/lower
while the
SEAT raises, a short beep
sounds, the seat slides further
into the vehicle and a short
beep sounds again.
SIENNA_AAS_OM08011U_(U)
3. When you think a malfunction has occurred
switch
AUTO ACCESS
49
to step are
4 9
3