Toyota Sienna Owner's Manual page 48

48
3. When you think a malfunction has occurred
Press and hold the seat posi-
4
tion adjustment switch on the
right-hand side of the seat in
either the front or back direction
and, at the same time as press
and hold the seat raise/lower
switch in either the raise or
lower direction for approxi-
mately 10 seconds, until the
beep sounds.
Seat
1
switch
Seat raise/lower switch
2
Within 10 seconds after the beep from step
5
the next beep starts to sound), press the seat position adjustment
switch (
1
or lower side of the seat raise/lower switch (
The beep sounds twice when initialization of the seat position information
has been completed. Conduct the procedures explained in the following "If
the AUTO ACCESS SEAT moves when a switch is pressed" section.
SIENNA_AAS_OM08011U_(U)
position adjustment
) either forward or back 4 times, and then press the raise
has sounded (until
4
) 4 times.
2