Table of Contents
Advertisement
Wireless remote control
If you suspect that the wireless remote control is malfunction-
ing, try the correction procedures listed in the table below.
If the seat still does not operate even after trying the procedures,
it is likely that the wireless remote control is malfunctioning.
Use the seat raise/lower switch to operate the AUTO ACCESS
SEAT (P. 34), and have the wireless remote control inspected
by your Toyota dealer immediately.
If the AUTO ACCESS SEAT does not move
The wireless remote control is too
far away from the vehicle.
Electromagnetic waves in the sur-
rounding area may cause the wire-
less
remote
operating.
The battery of the wireless remote
control is discharged.
The switch is being pressed repeat-
edly.
The temperature of the surrounding
area may cause the wireless remote
control to stop operating.
SIENNA_AAS_OM08011U_(U)
3. When you think a malfunction has occurred
Reason
control
to
stop
Correction procedure
Move to within approximately 3.3 ft.
(1 m) of the AUTO ACCESS SEAT
and operate the wireless remote
control.
Change your standing position.
Operate the seat using the seat
raise/lower switch.
Replace the battery. (P. 40)
Push and hold the switch.
Operate the seat using the seat
raise/lower switch.
59
3
Advertisement
Table of Contents
