Table of Contents
Advertisement
To verify serial communications
Start a terminal emulator program on the host computer.
1
If you are using a PC, the Terminal application in Microsoft Windows will
work fine.
If you are using a UNIX workstation, you can use a terminal emulator such as
cu or kermit.
Plug the power cord into the HP E3491A Pentium Probe.
2
When the HP E3491A Pentium Probe powers up, it sends a message (similar
to the one that follows) to the serial port and then displays a prompt:
Copyright (c) Hewlett-Packard Co. 1987
All Rights Reserved.
written permission is prohibited, except as allowed under copyright laws.
HPE3499A Series Emulation System
Version:
A.05.00 19Jan95 17:01 Proto
Location:
Generics
HPE3491A Pentium (tm)Processor Probe Emulator
Version:
A.01.00 05Jan95 12:22 Proto
R>
The version numbers may be different for your HP E3491A Pentium Probe.
Press the Return or Enter key a few times.
3
You should see a prompt such as "R>" or "p>".
See Also
"Problems with the Serial Interface," page 46.
Reproduction, adaptation, or translation without prior
Setting Up a Serial Connection
To verify serial communications
17
Advertisement
Table of Contents
