To connect the power cord and turn on the
HP E3491A Pentium Probe
1 Connect the power cord to the power supply and to a socket outlet.
2 Connect the 5V power cord to the back of the HP Pentium Probe.
The power light on the target side of the HP Pentium Probe will be illuminated. The HP Pentium Probe does not have an
On/Off switch.
Figure 2. Powering up the Pentium Probe
Connecting the HP E3491A Pentium Probe to a Power Source
To connect the power cord and turn on the HP E3491A Pentium Probe
7