Angelo Decor AD98102 Manual

Timber Falls Fountain AD98102
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Retrieve the tubing and light
Carefully unpack and
Securely attach the light Attach the tubing to the
cable from inside the
arrange all parts.
cable to the power supply. pump. If needed, water flow
fountain.
can be adjusted using the
flow control on the pump.
Place the pump inside the Align the cords and install
fountain. To prevent the risk the pump access door as
of water loss, create a drip shown.
loop with the cable from the
light.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China