Table of Contents
Advertisement
4.4.
Cord reel unit replacement
1. Lift the body partition assy (fitted with the cord reel unit)
while removing the cord reel shaft from the side of the
lower body.
2. Remove the screw fixing the body partition assy and the
cord reel unit.
3. Remove the cord reel unit from the body partition assy.
4.5.
Spring-loaded cord reel pre-
winding
1. The body partition assy has a spring that pre-winds the
cord reel.
If the cord is not wound, then press the brake lever unit,
and the cord pre-winding will be loosened.
Pre-wind the cord as indicated by the arrow mark.
Number of pre-windings: Four turns
* If you wish to release the pre-winding, then make
sure to hold the cord plug.
10
Advertisement
Table of Contents
