5.2.
Disassembly of Motor Case Set
Step 1 Release Rear Cover from Screw Holders.
Step 2 Remove Rear Cover.
Step 3 Pull up Motor Case Set from Lower Body.
5.3.
Disassembly of Cord Reel Unit
Step 1 Release the pretension of the Cord Reel Unit slowly by
holding on the Power Plug and pressing on the Brake Lever.
Step 2 Remove the Cord Reel Unit from the Motor Case Set by
inserting a slotted screwdriver into the shaft of the Cord Reel
Unit and turning it 90° counter-clockwise.
To assemble:
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.
9