Panasonic MC-CL676-ZC79 Service Manual page 12

4.7.2. Separation of the floor nozzle
upper U from the floor nozzle
lower U
1. Remove the four screws fixing the floor nozzle lower U.
(Fig.27)
2. Remove the floor nozzle lower U.
4.7.3. Turbine Ass'y
1. Pull up the floor nozzle wand U and remove the turbine
ass'y. (Fig.28)
4.7.4. Removal of the floor nozzle brush
CU.DU.EU.FU
1. Turn the floor nozzle lower unit over. Insert the tip of a
flat-blade screwdriver into the ditch in the brush installa-
tion part, then remove the brush.(Fig.29)
12