Table of Contents
Advertisement
2. Wiring treatment
3. Remove the right body packing from the lower body.
4. Remove the P.C.B. assy from the P.C.B. holder.
* When removing the P.C.B. assy, unhook it from the
tab on the P.C.B. holder by spreading the holder
frame.
Note: When removing the P.C.B. assy, do not bend it
to prevent damage and the wires from breaking.
5. Disconnect the fast-on terminal of the lead wire connect-
ing the fan motor unit to the P.C.B. assy.
* When connecting or disconnecting the fast-on ter-
minal, hold the P.C.B. assy and connecting terminals.
8
Advertisement
Table of Contents
