Cord Reel Partition Unit Replacement; Rail Base U Replacement - Panasonic MC-CG677K-S647 Service Manual

6. Similarly, remove the LED lamp printed circuit board from
the Air inlet guide U.
4.7. Cord reel partition unit
replacement
1. Increase the gap width between the cord reel and the
lower body with a screwdriver. While removing the cord
reel shaft from the side of the lower body, lift the cord reel
partition unit.
* For easy removal, pull out the cord slightly, and
then lift the cord reel.
4.8.

Rail base U replacement

1. Remove the screw fixing the rail base U onto the cord reel
partition U.
2. Remove the rail base U from the cord reel partition U.
11