En Quick Guide; General Information - urmet domus H.265 Series Quick Manual

EN QUICK GUIDE

HVR H.265 CON HDMI

GENERAL INFORMATION

Dear Customer,
Thank you for having purchased this Urmet product.
This document describes how to install and use the HVR models for H.265 Hybrid HVR URMET S.p.a.
Read this quick guide which contains information for correct, safe use carefully.
Keep this quick guide at hand so that you can refer to it when needed.
*NOTE
For more detailed information about the devices, refer to the complete user manual available on the
Urmet website (see QR code printed on the Addendum sheet).
WARNINGS
Power
Check mains rating before plugging the power unit in. Do not pull the cable to unplug the device.
Switch the device off before unplugging power unit. This operation must not be performed when the
HVR is recording, playing or from the configuration menu. Stop recordings and playback in progress
before disconnecting power from the device to prevent damaging the hard disk beyond repair.
Safety precautions
Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not
introduce material (solid or liquid) inside. If this should accidentally occur, disconnect the device from
the mains and have it inspected by qualified personnel.
Never open the device. In all cases, contact a qualified personnel or authorised service centre for
repairs (www. urmet.com >> Contacts >> Export Sales Network).
Keep the device away from children, to prevent accidental damage.
Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the
device is used in such conditions. Contact the retailer or authorised installer.
Installation precautions
To prevent overheating the device, arrange it in a position allowing the flow of air through the slots
in the casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do
not install sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not
install in areas subject to excessive dust, mechanical vibrations or shocks.
Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device
could fall causing injury or mechanical failures.
Do not install the device in a place where it could be exposed to humidity or water. Do not direct a
jet of water onto the device: risk of fire, electrocution or mechanical failure.
Stop using the device if water or other material should penetrate inside: risk of fire and electrocution.
Contact the retailer or authorised installer.
Do not place heavy or heat generating objects on top of the device: this could damage the casing
and/or increase internal temperature causing faults.
Do not cover the device with a cloth while it is running to prevent deforming the external casing and
22 DS1097-005B