Cables And Power Supply - BodyCAP e-CELSIUS Performance User Manual

Telemetric system for gastrointestinal temperature monitoring

Hide thumbs Also See for e-CELSIUS Performance:

Table of Contents

To exit the replace mode, you have to disassociate the capsules of the monitor (§ 6.7.9) and

download the data via the e-Performance Manager software.

Note: To exit the recovery mode, connect the monitor to a PC with the cables provided by the

manufacturer and go again to the tab Backup mode on the e-Celsius

software. Click then on "Disable the Backup mode." Banners on the monitor switch then again

in black, indicating that the replace mode is stopped.

8 Cables and power supply

Two cables are supplied with the system: two USB - micro-USB cables which allow

to connect the monitor to a computer to download data or power the monitor and/or

the activator by connecting them to a computer on or sector through the adapter.

Only cables and power supply provided by the manufacturer should be used to ensure proper

operation and to not deteriorate the system.

Picture 31: Cable and mains supply adaptor

User Guide e-CELSIUS Performance.2

performance Manager

Table of Contents

Do you have a question about the e-CELSIUS Performance and is the answer not in the manual?