Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
INCLUDING: OPERATION, INSTALLATION, SAFETY AND MAINTENANCE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump materi-
al options.
637397 for air section repair (see page 10).
637401-XXX for fluid section repair with seats (see page 8).
637401-XX for fluid section repair without seats (see page 8).
NOTE: This kit also contains several air motor seals which will
need to be replaced.
637395-X major air valve assembly (see page 11).
PUMP DATA
Models . . . . . . see Model Description Chart for "-XXX".
Pump Type . . Air Operated Double Diaphragm
Material . . . . see Model Description Chart.
Weight
PZ10A-XAX-XXX-AXX . . . . . . . . . . . 25.3 lbs (11.48 kgs)
PZ10A-XCX-XXX-AXX . . . . . . . . . . . 39.85 lbs (18.11 kgs)
PZ10A-XHX-XXX-AXX . . . . . . . . . . . . 44.25 lbs (20.11 kgs)
PZ10A-ASX-XXX-AXX . . . . . . . . . . . . . 42.85 lbs (19.41 kgs)
PZ10A-BSX-XXX-AXX . . . . . . . . . . . . . 42.85 lbs (19.41 kgs)
PZ10A-FSX-XXX-AXX . . . . . . . . . . . . . 48.55 lbs (22.01 kgs)
Add 6.44 lbs (2.92 kg) for Stainless Steel air motor
section
Maximum Air Inlet Pressure . . . . . . . 120 psig (8.3 bar)
Maximum Material
Inlet Pressure . . . . . . . . . . . . . . . . . . . . . . 10 psig (0.69 bar)
Maximum Outlet Pressure . . . . . . . . . 120 psig (8.3 bar)
Maximum Flow Rate
(flooded inlet)
Displacement / Cycle @ 100 psig . . . 0.232 gal. (0.88 lit.)
Maximum Particle Size . . . . . . . . . . . . 1/8" dia. (3.3 mm)
Maximum Temperature Limits
(Diaphragm / Ball / Seat material)
E.P.R. / EPDM . . . . . . . . -60
Hytrel
. . . . . . . . . . . . . -20
Nitrile . . . . . . . . . . . . . . 10
Polypropylene . . . . . . 32
Santoprene
. . . . . . . -40
PTFE . . . . . . . . . . . . . . . . 40
Viton
. . . . . . . . . . . . . . -40
Dimensional Data . . . . . . . . . . . see page 12
Mounting Dimension . . . . . . . 4" x 6.25"
Noise Level@ 70 psig, 60 cpm . . . . . . 80.6 dB(A)
The pump sound pressure levels published here have been updated to anEquiv-
alent Continuous Sound Level (LA
GI-PNEUROP S5.1 using four microphone locations.
INGERSOLL RAND COMPANY INC
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX (800) 892-6276
arozone.com
1" DIAPHRAGM PUMP
1:1 RATIO (METALLIC)
OPERATING OR SERVICING THIS EQUIPMENT.
. . . . . 52.2 gpm (197.6 lpm)
to 280
F (-51
to 138
º
to 180
F (-29
to 82
º
to 180
F (-12
to 82
to 175
F (0
to 79
to 225
F (-40
to 107
to 225
F (4
to 107
to 350
F (-40
to 177
(101.6 mm x 158.8 mm)
) to meet the intent of ANSI S1.13-1971, CA-
eq
© 2021
PZ10X-XXX-XXX-AXX
C)
C)
C)
C)
C)
C)
C)
RELEASED:
(REV: A)
MODEL PZ10X-AXX-XXX
PZ10X-BXX-XXX
MODEL PZ10X-FSX-XXX
Figure 1
11-26-21
Advertisement
Table of Contents
Related Manuals for Ingersoll-Rand ARO PZ10X-A Series
Summary of Contents for Ingersoll-Rand ARO PZ10X-A Series
- Page 1 OPERATOR’S MANUAL PZ10X-XXX-XXX-AXX INCLUDING: OPERATION, INSTALLATION, SAFETY AND MAINTENANCE RELEASED: 11-26-21 1” DIAPHRAGM PUMP (REV: A) 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference. SERVICE KITS Refer to Model Description Chart to match the pump materi- al options.
-
Page 2: Model Description Chart
MODEL DESCRIPTION CHART Model Code Explanation PZ10 Center Body Material A - Aluminum S - Stainless Steel Fluid Connection A - 1 - 11-1/2 NPTF - 2 B - 1 - 11 BSP F - 1" ANSI / DIN Flange (Raised Face) Fluid Caps &... -
Page 3: Operating And Safety Precautions
OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. Secure pump, connections and all contact points (feet must be bolted) and provide clearance around the EXCESSIVE AIR PRESSURE HAZARDOUS MATERIALS STATIC SPARK HAZARDOUS PRESSURE pump to avoid vibration and generation of contact or static spark. - Page 4 Trip points for the temperature and pressure moni- For ambient, process fluid and air inlet temperature toring system shall be set such that shutdown of the see the temperature table on page 5. Ensure proper housekeeping to eliminate dust build- pump occurs if air inlet pressure exceeds 120 PSIG or if the air inlet or fluid temperature exceeds the limita- up on the pump.
-
Page 5: Temperature Limits
TEMPERATURE LIMITS The seat, ball and diaphragm materials for metallic pumps establish the ambient and pump temperature limitations. Use the temperature table below and the model code for ball, seat, diaphragm material to determine the temperature range for each pump model. Model code is explained in detail on page 2. Example: PZ10X-XXX-AAA-AXX. -
Page 6: General Description
GENERAL PRODUCT SAFETY INFORMATION: MISAPPLICATION HAZARD. Do not use WARNING EXCESSIVE AIR PRESSURE. Can cause per- models containing aluminum wetted parts with food WARNING sonal injury, pump damage or property damage. products for human consumption. Plated parts can Do not exceed the maximum inlet air pressure as stat- contain trace amounts of lead. -
Page 7: Maintenance
Viton® is a registered trademarks of the Chemours Company y Hytrel® is a registered trademark of the DuPont Company yARO® is a registered trademark of Ingersoll-Rand Company y y Santoprene® is a registered trademark of ExxonMobil y Loctite®, 242® and 271® are registered trademarks of Henkel Loctite Corporation y y Lubriplate®... - Page 8 PARTS LIST / PZ10X-XXX-XXX-AXX FLUID SECTION Fluid Section Service Kits (637401-XXX OR 637401-XX): For Fluid Kits With Seats : 637401-XXX Fluid Section Service Kits include: Seats (see SEAT Option, refer to -XXX in chart below), Balls (see BALL Option, refer to -XXX in chart below), Diaphragms (see DIAPHRAGM Option, refer to -XXX in chart below), and items 19, 33, 70, 144, 175 and 180 (listed below) plus 174 and 94276 Lubriplate FML-2 grease (page 10).
- Page 9 MANIFOLD / FLUID CAP MATERIAL OPTIONS PZ10X-XXX-XXX-AXX Aluminum Cast Iron Hastelloy-C Stainless Steel Stainless Steel PZ10X-ASX-XXX PZ10X-XAX-XXX PZ10X-XCX-XXX PZ10X-XHX-XXX PZ10X-FSX-XXX PZ10X-BSX-XXX Item Description Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] (size) Pipe Plug Y17-125 Y17-55-S [SS]...
-
Page 10: Pilot Valve Disassembly
PARTS LIST / PZ10X-XXX-XXX-AXX AIR SECTION Indicates parts included in 637397 Air Section Service Kit shown below and items (70), (144), (175) and (180) shown on page 8. Item Description (size) Qty Part No. [Mtl] Item Description (size) Qty Part No. [Mtl] ... -
Page 11: Troubleshooting
PARTS LIST / PZ10X-XXX-XXX-AXX AIR SECTION PILOT VALVE 169c 168c 172c 171c c174 c173 173c 174c 132c Notch PILOT VALVE 200c 141c )ASSEMBLY TORQUE REQUIREMENTS( c)134 NOTE: DO NOT OVERTIGHTEN FASTENERS. Torque (105 and 134) screws to 40 - 50 in. lbs (4.5 - 5.6 Nm). Insert screwdriver here to remove LUBRICATION / SEALANTS... -
Page 12: Dimensional Data
DIMENSIONAL DATA (Dimensions shown are for reference only, they are displayed in inches and millimeters (mm)). Exhaust Port 3/4 - 14 NPT 1 - 11-1/2 NPTF - 2 (PZ10X-AXX-XXX) Air Inlet 1/4 -18 NPT 1 - 11 BSP (PZ10X-BXX-XXX) Material Outlet 1"... -
Page 13: Declaration Of Conformity
DECLARATION OF CONFORMITY INGERSOLL RAND INC MANUFACTURED BY: USA: 209 N. MAIN STREET, BRYAN, OHIO 43506 EU: 165 LAKEVIEW DRIVE, SWORDS, IRELAND DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE: TYPE / SERIES: AIR OPERATED DIAPHRAGM PUMPS MODEL: PZ05X-XXX-XXX, PZ10X-XXX-XXX, PZ15X-XXX-XXX, PZ20X-XXX-XXX, PZ30X-XXX-XXX. SERIAL NO. - Page 14 Page 14 of 16 PZ10X-XXX-XXX-AXX (en)
- Page 15 PZ10X-XXX-XXX-AXX (en) Page 15 of 16...
- Page 16 PN 97999-1933 Page 16 of 16 PZ10X-XXX-XXX-AXX (en)
Need help?
Do you have a question about the ARO PZ10X-A Series and is the answer not in the manual?
Questions and answers