Daikin FDMQ09RVJU Service Manual page 8

Fan Motor / Fan Rotor
Step
3. Remove the fan housing.
1 Unfasten the 2 hooks
and then remove the
fan housing (lower).
4. Release the fan motor
lead wire.
1 Cut the 2 clamps and
release the fan motor
lead wire from the wire
clamp material.
2 Cut the clamp.
6
Procedure
Fan housing (lower)
Side view from suction side
Wire clamp material
Bottom view
Clamp
 The number of the fan rotor
Hook
(R25870)
 When reassembling, fan
Clamp
Wire clamp
(R25871)
material
(R25872)
Si071951E
Points
varies depending on the
models.
motor lead wire should be
bundled and fixed with the
wire clamp material.
Fan motor
lead wire
(R25897)
Removal Procedure