Daikin FDMQ09RVJU Service Manual page 6

PCBs / Reactor / Terminal Blocks
Step
5. Remove the reactor.
1 Release the reactor
harness from the 2 wire
clips.
2 Remove the 2 screws,
and then the reactor.
6. Remove the terminal
blocks.
1 Remove the screw of
the earth/ground wire.
2 Disconnect the
connecting wires of the
terminal block (X1M).
3 Remove the screw and
then the terminal block
(X1M).
4 Disconnect the
connecting wires of the
terminal block (X2M).
5 Remove the 2 screws
and then the terminal
block (X2M).
4
Procedure
Reactor Wire clip
Terminal block (X2M)
Earth/ground wire
(R25865)
Terminal block (X1M)
#
(R25866)
Si071951E
Points
M4×25
Removal Procedure