Si071951E
Step
4
Cut the clamp and
release the harnesses
for thermistors from the
wire clamp material.
5
Cut the 3 clamps.
6
Remove the suction air
thermistor.
2. Remove the float switch.
1
Remove the 5 screws.
Removal Procedure
Procedure
Bottom view
Clamp
Wire clamp material
Clamp
Thermistors / Drain Pump / Float Switch
Points
Remove the fan motor/fan
rotor and drain pan
beforehand.
When reassembling,
harnesses for thermistors
should be bundled and fixed
with the wire clamp material.
(R25884)
Harnesses for
thermistors
Suction air thermistor
Clamp
You can remove the float
switch and drain pump
without removing the fan
motor.
(R25886)
Wire clamp
material
(R25898)
(R25885)
11