Table of Contents
Advertisement
Listening to the radio
3
Use the
(cursor up/down) buttons to select
a Noise cut mode (1,2 or 3).
4
Press ENTER to confirm.
Memorizing stations
You can save up to 30 station presets so that you always
have easy access to your favorite stations without having
to tune in manually each time.
1
Tune to an AM or FM radio station.
For FM stations, select mono or auto-stereo as
necessary; for AM stations, set the noise cut mode as
necessary. These setting is saved along with the preset.
2
Press SHIFT and SYSTEM SETUP.
3
Use the
(cursor left/right) buttons to
choose 'St. Memory?' then press ENTER.
4
Use the
(cursor up/down) buttons to select
the station preset you want.
There are 30 preset locations; each can store one station
preset.
5
Press ENTER to save the station preset.
Note
• If the system is unplugged from the power supply
completely, saved stations will remain for several
days, after which you'll have to save them again.
Listening to station presets
1
Make sure the tuner function is selected (press
FM/AM, or use the INPUT SELECT button if it isn't).
2
Use the ST +/– buttons to select a station preset.
11
91
En
Advertisement
Table of Contents
