Table of Contents
Advertisement
Recording
• DVD recording: The AUTO option automatically sets
the best recording quality for the space available on
the disc loaded at the time of recording.
• HDD recording: The AUTO option automatically sets
the best recording quality that would fit on to a blank
DVD disc.
• Press DVD to record to DVD disc, or HDD if you want
to record to the hard disk drive.
4
Use
(cursor buttons) to move the
cursor to the recording start date and time on the
grid.
• You can move the cursor forward or back an hour at
a time using the
and
Current time
Easy Timer Recording
8:
9:
10:
00
00
00
13/12
14/12
15/12
13/12
MON
CHANNEL + / –
Pr 7
REC MODE
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can't therefore be selected. The lighter area is time
that's available.
5
Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN.
6
Use the
(cursor left/right) to move the
cursor to the recording end time on the grid.
Recording start time
Easy Timer Recording
11:
12:
13:
00
00
00
13/12
14/12
15/12
13/12
11:45
MON
CHANNEL + / –
Pr 7
REC MODE
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
buttons.
Recording start time
11:
12:
13:
14:
00
00
00
00
11:45
- -:- -
FINE
HDD
HDD/DVD
Recording end time
14:
15:
16:
17:
00
00
00
00
13:45
FINE
HDD
HDD/DVD
7
Press ENTER to set the end time.
8
Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see Standard
timer recording below).
Standard timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
ST –
HOME
MENU
PREV
NEXT
1
Press HDD or DVD.
2
Press HOME MENU and select 'Timer Recording'
then 'Timer Recording (View)'.
This screen shows all the timer programs currently set.
Timer Recording
Date
Start
Stop
12/13 MON
19:00
20:00
12/14 TUE
21:00
22:00
New Input
HDD Remain
DVD Remain
• Each row is for one timer recording program, with the
date and time information, channel, recording mode,
DVD or HDD and recording status.
• The amount of free space available on the HDD and
the currently loaded recordable DVD is shown
towards the bottom of the screen.
• In the lower-right corner, the number of timer
programs already set is shown next to Tmr Pgms.
• If there are more than eight timer programs already
set, press NEXT
to switch page (go back using
the PREV
button).
CLEAR
TUNE +
ST +
ENTER
TUNE –
CH
Mode Rec to Confirm
32
FINE
HDD
OK
43
FINE
HDD
OK
10h20m (FINE)
1/1
0h43m (FINE)
06
49
En
Advertisement
Table of Contents
