Connecting To A Cable Box Or Satellite Receiver (1) - Pioneer HTZ-929DVR Operating Instructions Manual

Dvd-r w/hdd 5.1 ch surround system, dvd-rw/hdd tuner, speaker system, powered subwoofer
Hide thumbs Also See for HTZ-929DVR:
Table of Contents

Advertisement

16
Other connections

Connecting to a cable box or satellite receiver (1)

If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If
many or all the channels are scrambled, we recommend using the setup on the following page.
Using the setup on this page you can:
• Record unscrambled channels by selecting them on this recorder.
• Record scrambled channels by selecting them on the cable box/satellite tuner and using the Auto Start Recording
feature (see Automatic recording from a satellite tuner on page 54).
• Watch one channel while recording another.
Important
• Do not connect the video output of this system to your TV via your VCR, satellite receiver or cable box. Always
connect it directly to your TV.
VIDEO
INPUT
2
VHF/UHF ANTENNA
SCREW
OUT
IN
MAX4mm
FM UNBAL
75Ω
AM/FM ANTENNA
1
Antenna/cable TV
wall outlet
114
En
TV
VHF/UHF
IN
1
OPTICAL
VHF/UHF
OUT
OUT
Cable box/
VHF/UHF
satellite tuner
A/V
IN
OUT
1
COMPONENT
S - VIDEO
S - VIDEO
AUDIO
IN
OUT
S - VIDEO
L
L
Y
IN
P
OUT
B
R
R
VIDEO
VIDEO
S - VIDEO
LINE1 IN
MONITOR
ANALOG AUDIO
P
R
(
AUTO START REC
)
OUT
IN
AM
LOOP
USE ONLY WITH S-DVR9 SW
CONTROL
1
Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2
Use a video cable to connect the VIDEO
MONITOR OUT jack to a video input on your TV.
This enables you to watch the output from this system.
• You can optionally use the S-video or component
video jacks to connect this system to your TV. See
Connecting using the S-video output and Connecting
using the component video output on page 116.
3
Use an audio/video cable to connect the audio/
video outputs on your cable box/satellite receiver to
the LINE 1 IN (AUTO START REC) jacks.
4
This enables you to record scrambled TV channels.
4
Use an optical digital audio cable to connect the
digital audio output on your cable box/satellite
3
receiver to the OPTICAL DIGITAL AUDIO IN 1 jack.
This enables you to listen to cable/satellite channels with
VIDEO
R
AUDIO
L
LINE3
digital audio.
IN
LINE OUT
R
L
VIDEO
AUDIO
OUT
IN 1
IN 2
OPTICAL DIGITAL AUDIO

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv-dvr9hS-dvr9stS-dvr9sw

Table of Contents