Navigating Discs And The Hdd; Scanning Discs - Pioneer HTZ-929DVR Operating Instructions Manual

05 Playback
Changing the thumbnail picture for a title
VR mode Video mode
You can change the thumbnail picture that appears for
each title in the Disc Navigator screen using the NAVI
MARK button.
1 Start playback of the title you want to change
the thumbnail for.
2 Press NAVI MARK anywhere in the title to make
the displayed picture the thumbnail for that title.
• For greater control over the exact frame you want to
use, you can use the
frame advance/reverse controls (

Navigating discs and the HDD

ALL
During playback you can easily jump to another title,
chapter or track on a disc using the number buttons on
the remote.
36
En
HDD
NAVI MARK
PAUSE and/or slow-motion/
/ ).
CLEAR
ENTER
DVD-Video Video mode
1 During playback use the number buttons to
enter a chapter number within the current title.
For example, for chapter 6, press 6; for chapter 24,
press 2, then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new chapter.
VR mode HDD
1 During playback, use the number buttons to
input a title number.
For example, for title 6, press 6; for title 24, press 2,
then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new title.
CD Video CD Super VCD
1 During playback, use the number buttons to
input a track number.
For example, for track 6, press 6; for track 24, press 2,
then 4.
• To clear and start again, press CLEAR.
2 Optionally: Press ENTER.
• Alternatively, just wait a few seconds and playback
will jump to the new track.

Scanning discs

You can fast scan discs at various speeds, forwards or
backward.
REV SCAN
1 During playback, press
reverse or forward scanning.
• The scanning speed is shown on-screen.
WMA/MP3
PLAY FWD SCAN
or to start