Getting started
Using the Room Setup
After you have set up your speakers to your liking (see
Home theater sound setup on page 30), make sure you
calibrate your system for surround sound. This is a quick
and easy way to get good surround sound for your room.
For a more detailed surround sound setup, see Using the
System Setup menu on page 92.
ST –
SHIFT
1
Press SHIFT and SYSTEM SETUP.
2
Use the
(cursor left/right) buttons to select
'Room Set ?' from the menu, then press ENTER.
3
Use the
(cursor up/down) buttons to select
a room size setting, then press ENTER.
Select from:
• Room S – Smaller than average room (approx. 3.5 x
4.5m)
• Room M – Average room (approx. 5.5 x 6.0m)
• Room L – Larger than average room (approx. 7.5 x
9.0m)
4
Use the
(cursor up/down) buttons to select
a seating position setting, then press ENTER.
Select from:
• Seat Fwd – If you are nearer to the front speakers
than the surround speakers
• Seat Mid – If you are equal distance from the front
and surround speakers
• Seat Back – If you are nearer to the surround
speakers than the front speakers
TUNE +
SYSTEM
SETUP
ST +
ENTER
TUNE –
Selecting the hard disk or DVD for
playback and recording
The HDD and DVD buttons (remote control) are used to
select the hard disk (HDD) or DVD for playback and
recording. You can see in the front panel display which is
currently active. Additionally, the HDD indicator on the
front panel lights blue when the HDD is selected.
HDD
DVD
Alternatively, you can use the HDD/DVD button on the
front panel. Press to switch from one to the other.
03
21
En