Table of Contents
Advertisement
16
Other connections
Function setting for DIG.2 input
• DIG.2 -> None/PDP1–5/PDPTV – Matches the digital
input 2 function of this unit with a numbered video
input on the plasma display. For example, DIG.2 ->
PDP3 matches digital input 2 with video input 3 on
the plasma display.
Function setting for analog input
• ANA -> None/PDP1–5/PDPTV – Matches the
ANALOG function of this unit with a numbered video
input on the plasma display. For example, ANA ->
PDP1 matches the analog input with video input 1 on
the plasma display.
Note
• The 3-ringed SR+ cable from Pioneer is
commercially available under the part number
ADE7095. Contact the Pioneer Customer Support
division for more information on obtaining an SR+
cable.
• You won't be able to use the remote sensor of this
unit with the CONTROL IN jack of this unit connected
to the CONTROL OUT jack of your plasma display.
You can use the remote sensor of the plasma display
(even in standby) as long as the power isn't switched
off.
• The number of video inputs available will depend on
the plasma display you've connected.
• The PDP5 input may be called 'PC Input' (or similar)
on your plasma display.
• The SR+ setting remains in effect even in standby.
120
En
Advertisement
Table of Contents
