Mocka Dakota Dining Table Assembly Instructions

Download this manual

Dakota Dining Table

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

long bolt

bolt

x20

Hardware Supplied

Phillips screwdriver required

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

mocka.co.nz | mocka.com.au

| PO BOX 6171, Maroochydore, QLD, 4558

allen key

WARNING:

Any furniture that is not anchored to a wall has the potential to tip

over in certain circumstances, i.e. if a child attempts to climb up on the furniture

or in the event of an earthquake. Accordingly, we recommend that all furniture

is anchored to a wall. We supply a free safety wall anchor with all furniture sold

and we recommend these are used to prevent your product tipping. The fixing

device provided should fit most wall types, but please note that different wall

materials may require different fixing devices from those supplied.

Need help?

Do you have a question about the Dakota Dining Table and is the answer not in the manual?

Page 1 Dakota Dining Table Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Page 2 Attach 2x panels [2] to 2x panels [3] and secure with 4x long Attach 2x panels [2] to panel [4] and secure with 2x long bolts (A). bolts (A). Tighten with an Allen key (C). Tighten with an Allen key (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 3 Ensure unit is balanced and steady before use. You’re done, enjoy! long bolts (A). Attach panel [4] to panel [1] and secure with 2x bolts (B). Tighten with an Allen key (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...