Mocka Dakota Assembly Instructions

Mocka Dakota Assembly Instructions

Console table

Advertisement

Dakota Console Table
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
40mm
12mm
screw x12
screw x12

Hardware Supplied

Phillips screwdriver required
mocka.co.nz | mocka.com.au
C
D
32mm
allen key
screw x6
x1

WARNING:

V
W
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided
should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
safety
wall
strap x1
cr ew x1
X
Y
wall
r/washer
anchor
screw
x1
x1
Z
washer
x2
Wall Strap
Any furniture that is not anchored to a wall has the
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dakota and is the answer not in the manual?

Questions and answers

Summary of Contents for Mocka Dakota

  • Page 1 Dakota Console Table Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
  • Page 2 Dakota Console Table Assembly Instructions Attach panels [2] and [3] to panel [1] as shown using 6x 40mm screws Attach panel [1] to the rest of the unit using 6x 40mm screws (A) and (A) and tighten with the allen key (D).
  • Page 3 Dakota Console Table Assembly Instructions Carefully lay the frame onto its side and attach panel [4] as shown Carefully lift unit onto its feet. Attach safety strap (V) to the underside using 6x 32mm screws (C). Attach both panels [5] as shown using 12x of the panel [4] using 1x washer (Z) and 1x screw (Y).
  • Page 4 Dakota Console Table Assembly Instructions Strap Washer wall anchor wall screw Use a drill to create a small hole lining up with the top of the safety strap You’re done, enjoy! (V). Fasten to wall using 1x wall anchor (X), 1x washer (Z) and 1x screw (W).

Table of Contents