General - Lincoln Electric OPTITOME II Series Safety Instruction For Use And Maintenance

8695 4788 / A

2 - GENERAL

This is a numerically controlled single-piece plasma cutting machine that is particularly
suited to industries that use steel, stainless steel and aluminium for plates measuring :
1500*3000 => OPTITOME II 1530

2000*4000 => OPTITOME II 2040

2000*1000 => OPTITOME II 2010

2000*6000 => OPTITOME II 2060

The main intended applications are those of iron workers, metal workers, air
processing, air-conditioning, ventilation, refractory industries, workshops producing in
small and medium runs or support production.
It is managed by a CNC control of the type HPC DIGITAL PROCESS HPi.
This machine uses:
all the dry plasma cutting methods of the installations NERTAJET HP150

(150A) and HP300 (300A),

optional oxycutting to allow the occasional cutting of black steels, maximum
thickness 50mm,

optional WEN marking or FELT marking.
The control console supports the operating approach.
The integration of an extraction table (included in the basic offer) that can be
connected to any extraction and/or filtration system and fitted with slag collector boxes
makes its conditions of use maximally safe and healthy. The plate frame is removable,
giving easy access for cleaning the boxes, or for replacing it to make it easier to load
and unload cut pieces.
The frame is 800mm high and has been designed to allow access so that the distance
between the edge of the rails and the side ends of the table is as short as possible.
OPTITOME HPC 2
C - DESCRIPTION
C-9