Sanyo AVM-2550S Training Manual page 8

NO.
XXX OPT
DECIMAL DATA (ZERO SUPPRESSED)
TITLE OPT, OP2
NO. 29, 30
PROGRAM CODES
The microprocessor used in the VB7C chassis is a multi-purpose type and is
used in several different models. To ensure proper operation and the correct
features for your particular model, the Program Codes must be correct.
Note: To enter the service adjustment menu, connect the AC power cord
while pressing the MENU key. The service adjustment can be made
with the remote control. To exit the service adjustment mode, press the
MENU key again. Refer to the specific Service Manual for your model
for complete adjustment procedure.
DATA
XXX XXXXXXXX
BINARY DATA (8 bit)
BIT FUNCTION
0 NOT USED
1 NOT USED
2 NOT USED
3, 4 CLOCK
5 NOT USED
6 SURROUND
7 NOT USED
BIT FUNCTION
0 PIP RATING INFO.
1 COLOR ENHANCER
2 INITIAL CHANNEL
3 NOT USED
4 PIP
5 AV1 / AV1, AV2
6 TONE / BASS, TREBLE BASS, TRE.
7 NOT USED
* . . . .When the Initial Channel option is used, the Initial Channel (the TV can
be set automatically to tune to a specific channel each time it is turned
on.) and XDS (Extended Data Service) features are available.
– 5 –
DATA
0 1
–– ––
–– ––
–– ––
00: NONE
01: YES (AC 60 Hz)
10: YES (INT OSC)
11: INHIBITED (=NONE)
–– ––
NONE YES
–– ––
Option Data 1
DATA
0 1
–– ––
NONE YES
NONE YES *
–– ––
NONE YES
AV1 AV1, AV2
TONE
–– ––
Option Data 2